ESG-3A1640
SPECIFICATIONS:
Longitudinal Hydraulic.
Longitudinal Hydraulic And Crossfeed Motorized.
Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized.
Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.
MODEL | ESG-3A1640 | |
Table Size | 406x1020mm(16×40″) | |
Max.grinding length | Longitudinal | 1020mm(40″) |
Max.grinding width | Crosswise | 410mm(16″) |
Max. distance from table surface to spindle centerline | Standard column:630mm(24 3/4″); Optional high column:720mm(28 5/16″) | |
Stadard magnetic chuck size | 400x800mm(15 11/16×31 1/2″) | |
Longitudinal movement of table | Max. travel, hydraulic | 1060mm(41 11/16″) |
Max. travel, manual | 1100mm(43 1/4″) | |
Max. travel,infinitely variable | 60HZ,5-25m/min,50HZ,5-20m/min | |
Cross transverse travel | Auto transverse increment | 1~25mm(0.04″-1″) |
Max. auto transverse travel | 430mm(17″) | |
Max. manual transverse travel | 460mm(18″) | |
Handwheel per revolution | 5mm(0.2″) | |
Handwheel per graduation | 0.02mm(0.001″) | |
Sheelhead vertical infeed | Automatic infeed | 0.001-0.04mm(0.00005-0.002″) |
Step feed (jog) | 0.001mm(0.00005″) | |
Rapid travel, Approx | 150mm/min | |
Slow travel, Approx | 6mm/min | |
Handwheel revolution | 1mm(0.05″) | |
Handwheel graduation | 0.005mm(0.0005″) | |
Grinding spidle drive | Speed | 60HZ,1750 R.P.M.; / 50HZ,1450 R.P.M. |
Power rating | Standard:5HP; Optional:7 1/2HP,10HP | |
Standard grinding wheel | Diameter | 355mm(14″) |
Width | 50mm(2″) | |
Bore | 127mm(5″) | |
Hydraulic motor | Power rating | 3.0HPx6P |
Crossfeed motor | Power rating | 80Wx6P |
Elevating motor | Power rating | 1/4HPx6P |
Floor space | Total space required | 4020x2200x2050xmm(158x87x81″) |
Weights | Net weight, Approx. | 4000KGS(8800LBS) |
Gross weight, Approx. | 4500KGS(9900LBS) | |
Rated power, Approx | 8 1/2HP(Spindle motor:5HP)
11HP(Spindle motor:7.5HP), |
|
Packing dimensions | L x W x H | 3250x2290x2200mm(128x90x88″) |
NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.
GENERAL FEATURES:
1.Column:
Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.
2.Construction:
Construction of table, saddle and base is casted with high grade iron, strongly ribbed.
3.Spindle:
Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.
4.Slideways:
Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy.
5.Automatic Continuous Lubrication System:
All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.
6.Cross Feed:
Ball screw for cross travel, powered by AC motor.
7.Hydraulic Table:
Table speed ranges 5-25m/min. With rack and pinion table drive for hand operation.
8.Proximity Switch:
Provide built-in-type (hidden) proximity switch, features safe and easy operation.
9.Table Speed Control:
Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time.
10.Hand Wheels:
Zero-setting slip-ring with vernier on vertical handwheel, and vernier on crossfeed handwheel.
OPTIONAL ACCESSORES:
- Electro Magnetic Chuck
- Inclinable Permanent Magnetic Chuck
- Swivel Wheel Guard
- Frequency Changer
- Coolant System With Manual Paper Feeding Device
- Auto Paper Feeding Device With Magnetic Separator
- Full Guarded Splash Guard (10/12/16 Series)
- Electro Parallel Dressing Attachment
- Screw Type Parallel Dressing Attachment
- Concave Convex Forming Dresser
- Work Lamp
- Splash Guard
- Wheel Flange
- Manual Parallel Dresser
- Chuck Control With Demagnetizer
- Precision Vice
- Punch Former
- Balancing Stand (Double Line)
- Roller Type Balancing Stand
- Micro Crossfeed For 10/12/16 Series
- Ratchet Type Electro Parallel Dresser (10/12/16 Series)
- Digital Readout
- Permanent Magnetic Chuck
- Micro Down Feed For 10/12/16 Series
STANDARD ACCESSORIES:
1. Tool box with tools
7. Touch-up paint
2. Wheel extract screw & nut
8. Auto lubrication system
3. Balancing arbor
9. Diamond dresser
4. Levelling screw with blocks
10. Crossfed Ballscrew
5. Grinding Wheel
11. Sweeping plate
6. Wheel flange
12.Splash Guard
Get Quotation