ESG-1632ASDII
SPECIFICATIONS：
CONTROL PANEL
Vertical feed powered by double motors High efficiency AC motor for rapid up / down. Stepping motor for micro downfeed positioning and slow up / down. Quick digit output feedback by encoder.
Display for position of axis Y to show the present position of spindle. The digit display is for setting start point, rough grinding volume, start point for finish grinding(finish rginding volume), downfeed volume for finish grinding, target point, rise up point, intermittent spark-out, and spark-out.
Cross transverse travel powered by DC servo motor. Available for step feed and continuous infeed grinding. The speed for dressing wheel is adjustable on the panel.
GRINDING PROCEDURES
1A:Longitudinal Hydraulic
2A: Longitudinal Hydraulic And Crossfeed Motorized
3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized.
ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down
| MODEL | ESG-1632ASDII | |
| Table Size | 406x813mm | |
| Max.grinding length | Longitudinal | 813mm |
| Max.grinding width | Crosswise | 410mm |
| Max. distance from table surface to spindle centerline | Standard column:630mm; Optional high column:720mm | |
| Stadard magnetic chuck size | 400x800mm | |
| Longitudinal movement of table | Max. travel, hydraulic | 890mm |
| Max. travel, manual | 930mm | |
| Max. travel,infinitely variable | 60HZ,5-25m/min,50HZ,5-20m/min | |
| Cross transverse travel | Auto transverse increment | 1-25mm |
| Auto constant feeding speed | 20-320mm/min | |
| Max. auto transverse travel | 430mm | |
| Max. manual transverse travel | 460mm | |
| Handwheel revolution | 5mm | |
| Handwheel graduation | 0.02mm | |
| Sheelhead vertical infeed | Automatic infeed | 0.001~0.05mm |
| Step feed (jog) | 0.001mm | |
| Rapid travel, Approx | 150mm/min | |
| Slow travel, Approx | 6mm/min | |
| Handwheel revolution | 1mm | |
| Handwheel graduation | 0.005mm | |
| Grinding spidle drive | Speed | 60HZ,1750R.P.M.;50HZ,1450R.P.M. |
| Power rating | Standard:5HP; Optional:7 1/2HP,10HP | |
| Standard grinding wheel | Diameter | 355mm |
| Width | 50mm | |
| Bore | 127mm | |
| Hydraulic motor | Power rating | 3.0HPx6P |
| Crossfeed motor | Power rating | 80Wx6P |
| Elevating motor | Power rating | 1/4Wx6P |
| Floor space | Total space required | 3290x2200x2050mm |
| Weights | Net weight, Approx. | 3400KGS |
| Gross weight, Approx. | 4000KGS | |
| Rated power, Approx (Standard power rating) | 8 1/2HP(Spindle motor:5HP),11HP(Spindle motor:7.5HP),13 1/2HP(Spindle motor:10HP) | |
| Packing dimensions | L x W x H | 2800x2290x2200mm |
NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.
General Features：
1.COLUMN:
Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.
2.CONSTRUCTION:
Construction of table, saddle and base is casted with high grade iron, strongly ribbed.
3.SPINDLE:
Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.
4.SLIDEWAYS:
Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy.
5.AUTOMATIC CONTINUOUS LUBRICATION SYSTEM:
All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.
6.CROSS FEED:
Ball screw for cross travel, powered by DC servo motor.
7.PROXIMITY SWITCH:
Provide built-in-type (hidden) proximity switch, features safe and easy operation.
8.Table speed control:
Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time.
OPTIONAL ACCESSORES：
- Electro Magnetic Chuck
- Inclinable Permanent Magnetic Chuck
- Swivel Wheel Guard
- Frequency Changer
- Coolant System With Manual Paper Feeding Device
- Auto Paper Feeding Device With Magnetic Separator
- Coolant System
- Dust Collector
- Screw Type Parallel Dressing Attachment
- Concave Convex Forming Dresser
- Work Licht(Quartz)
- Splash Guard
- Spare Wheel Flange
- Manual Parallel Dresser
- Chuck Control With Demagnetizer
- Precision Vice
- Punch Former
- Balancing Stand(Double Line)
- Roller Type Balancing Stand
- Micro Crossfeed For 618/818 Series
- Ratchet Type Electro Parallel Dresser (10/12/16 Series)
- Digital Readout
- Permanent Magnetic Chuck
- Manual Pulse Generator For ASDII Type
- Coolant System With Magnetic
- Coolant And Dust Unit
- Full Guarded Splash Guard (10/12/16 Series)
- Electro Parallel Dressing Attachment
- Micro Crossfeed For 10/12/16 Series
- Micro Down Feed For 10/12/16 Series
STANDARD ACCESSORIES：
1. Tool box with tools
7. Touch-up paint
2. Wheel extract screw & nut
8. Auto lubrication system
3. Balancing arbor
9. Diamond dresser
4. Levelling screw with blocks
10. Crossfed Ballscrew
5. Grinding Wheel
11.Sweeping Plate
6. Wheel flange
12.Splash Guard
Get Quotation