HF Series
features
HF series, the 3-axis bridge type CNC milling machining center, is one of the proudest products of Vision Wide which fulfills automatic 5-face machining with super rigidity structure and high positioning accuracy, and its X travel ranges from 4,100mm to 10,100mm, and Y travel ranges from 3,500mm to 4,700mm. HF satisfies demands in mold surface cutting, angles cutting, 3D mold cutting, and precise contour finishing.
We developed tool center point compensation, auto multi-angle head attachment, and auto tool change system to complete auto 5-face machining.
- High rigidity box base, best span worktable guideways, and wider load dimension ensured the best level of dynamic accuracy.
- Cross-section square beam enabled the center of the head close to the beam center to ensure the heavy cutting ability.
- Fully auto 5-face machining capacity
- Auto head change: 90º head/extension head / universal head
- Vertical and horizontal auto tool change for 90º head
- AC 3-axis mechanical coordinates system
specifications
| Model | Unit | HF-4235 /HF-4242 | HF-5235 /HF-5242 | HF-6235 /HF-6242 | HF-8235 /HF-8242 | HF-10235 /HF-10242 | ||
| X axis travel | mm | 4,100 | 5,100 | 6,100 | 8,100 | 10,100 | ||
| Y axis travel | mm | 3,500/ 4,200 | ||||||
| Z axis travel | Box way / single ballscrew | mm | 920 ; 1,020(Opt.) | |||||
| Linear way, Enclosed Box Ram/Dual ballscrews | mm | 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.) | ||||||
| Table dimension | mm | 4,000×3,000 | 5,000×3,000 | 6,000×3,000 | 8,000×3,000 | 10,000×3,000 | ||
| Max. table load | kg | 20,000 | 24,000 | 28,000 | 32,000 | 36,000 | ||
| Spindle motor power(cont./30 min. rated) | kW | 22/26(30/37Opt.) | ||||||
| Spindle speed | Box way / Single ballscrew |
2-step gear | rpm | 4,000 ; 6,000(Opt.) | ||||
| Linear way, Enclosed Box Ram/Dual ballscrews | 2-step gear | rpm | 4,000 ; 6,000(Opt.) | |||||
| Direct-driven | rpm | 10,000(Opt.) | ||||||
| Cutting federate | mm/min | 1-7,000 | ||||||
| Rapid traverse | X axis | m/min | 10 | 8 | ||||
| Y axis | m/min | 10/10 | ||||||
| Zaxis | Box way / Single ballscrew Linear way/ Dual ballscrews |
m/min | 15 | |||||
| Enclosed Box Ram/Dual ballscrews | m/min | 12 | ||||||
| ATC capacity | Vertical type tool change | pcs | 32 / 40 (Opt.) / 60 (Opt.) | |||||
| Floor-standing type vertical tool change | pcs | 32 (Opt.) / 40 (Opt.) / 60 (Opt.) | ||||||
| Floor-standing type vertical-horizontal tool change | pcs | 32 (Opt.) / 40 (Opt.) / 60 (Opt.) | ||||||
| Model | Unit | HF-4240 /HF-4247 | HF-5240 /HF-5247 | HF-6240 /HF-6247 | HF-8240 /HF-8247 | HF-10240 /HF-10247 | ||
| X axis travel | mm | 4,100 | 5,100 | 6,100 | 8,100 | 10,100 | ||
| Y axis travel | mm | 4,000/ 4,700 | ||||||
| Z axis travel | Box way / single ballscrew | mm | 920 ; 1,020(Opt.) | |||||
| Linear way, Enclosed Box Ram/Dual ballscrews | mm | 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.) | ||||||
| Table dimension | mm | 4,000×3,500 | 5,000×3,500 | 6,000×3,500 | 8,000×3,500 | 10,000×3,500 | ||
| Max. table load | kg | 20,000 | 24,000 | 28,000 | 32,000 | 36,000 | ||
| Spindle motor power(cont./30 min. rated) | kW | 22/26(30/37Opt.) | ||||||
| Spindle speed | Box way / Single ballscrew |
2-step gear | rpm | 4,000 ; 6,000(Opt.) | ||||
| Linear way, Enclosed Box Ram/Dual ballscrews | 2-step gear | rpm | 4,000 ; 6,000(Opt.) | |||||
| Direct-driven | rpm | 10,000(Opt.) | ||||||
| Cutting federate | mm/min | 1-7,000 | ||||||
| Rapid traverse | X axis | m/min | 10 | 8 | ||||
| Y axis | m/min | 10/10 | ||||||
| Zaxis | Box way / Single ballscrew Linear way/ Dual ballscrews |
m/min | 15 | |||||
| Enclosed Box Ram/Dual ballscrews | m/min | 12 | ||||||
| ATC capacity | Vertical type tool change | pcs | 32 / 40 (Opt.) / 60 (Opt.) | |||||
| Floor-standing type vertical tool change | pcs | 32 (Opt.) / 40 (Opt.) / 60 (Opt.) | ||||||
| Floor-standing type vertical-horizontal tool change | pcs | 32 (Opt.) / 40 (Opt.) / 60 (Opt.) | ||||||
※Please contact sales for more details.
specifications
Standard Accessory & Function
- FANUC 0iMF PLUS controller
- Box way 4,000rpm 2-step gear type spindle
- Z axis travel 920mm (Box way)
- Spindle cooling system
- Twin hydraulic cylinders with pressured Nitrogen auxiliary counterweight system
- X, Y axis ballscrew support device (X axis ≧4m，Y axis ≧3m)
- Centralized auto lubrication system
- Independent lubrication oil collector
- Air blast through spindle
- Wash gun and pneumatic interface
- Cutting fluid cooling system
- Vertical type tool magazine 32 tools
- Enclosed sheet metal guard without roof (NF series X axis ≦6m)
- Four piece sheet metal guard (NF series X axis ≧ 8m) (all HF series)
- Screw type chip conveyor on table sides
- Caterpillar type chip conveyor / Water tank
- Heat exchanger for electrical cabinet
- Swiveling arm type operation panel
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- Footswitch for tool clamping
- RJ45 interface
- XYZ-axis absolute pulse coder feedback
- XYZ-axis travel hard limits protection
- Spindle cutting load software protection
- Auto power off function
- Vision Wide FX graphical user interface
- Foundation pads and bolts kits
- Adjustment tool and tool kits
- Technical manuals (operation, maintenance manual and circuit diagram)
Optional Accessory & Function
- FANUC 31iB/ SIEMENS 828D / HEIDENHAIN TNC640/ SIEMENS ONE / MITSUBISHI M80 TypeA/
- MITSUBISHI M830 controller
- Box way :
- 6,000rpm 2-step gear type spindle
- Linear way/Enclosed Box Ram :
- 4,000/6,000rpm 2-step gear type spindle
- 10,000/12,000rpm direct driven type spindle
- 8,000/12,000rpm Built-in type spindle
- Z axis travel 1,020mm (Box way)
- Z axis travel 1000/1200/1400mm
- (Linear way/Enclosed Box Ram，for gear/ direct-driven / built-in type spindle)
- Column heighten 200/400/600/800mm
- Spindle ring cutting coolant device（for no head attachment）
- Coolant through spindle system 20/70 bar
- Coolant through tool holder 5/18 bar cutting fluid system
- Oil skimmer
- Oil mist cooling device
- Oil mist recycle device
- Vertical type tool magazine 40/60 tools
- Floor-standing vertical type tool magazine 40/60 tools
- Floor-standing vertical-horizontal type tool magazine 40/60/90 tools
- Four piece sheet metal guard（NF series X axis ≦ 6m）
- Enclosed sheet metal guard with roof（NF series X axis ≦ 6m）（not for NF-xx32/39 and HF series）
- Enclosed sheet metal guard without roof（NF series X axis ≧ 8m）（all HF series）
- Helical bladed screw conveyor on table sides
- Chip cart
- Air conditioning for electrical cabinet
- Wireless remote control manual pulse generator
- 3-axis independent manual pulse generator（Only for FANUC）
- XYZ axis linear scale feedback
- Sub working table
- Rotary table
- Interface reserved for fourth axis
- The interface of coolant through spindle
- Z-axis retract function at power failure
- Auto measurement system
- Auto warm up
- Transformer
- Spindle and structure temperature thermal compensation system
- Switch for tool clamping