LV80
LV80 (BT40) X800 / Y500 / Z500
- Three axes ball screws have adapted direct transmission design, which clears the noise during transmission, cutting down temperature, stabling accuracy and also increases machining rigidity.
- The ATC system and all machine functions have been thoroughly tested.
- LASER Check, Ball test and Spindle Dynamic Balance are performed to ensure the optimum static and dynamic accuracy.
Specification
| Model | LV80 |
|---|---|
| WorK Table | 950 X 500 mm |
| T-slot(sige X number) | 80 X 18 mm X 5T |
| Max. Loading | 500kg |
| Three Axes Travel | 800 X 500 X 500mm |
| Spindle Nose to Worktable Surface | 125~625mm |
| Spindle Center to Column Slide Ways | 550mm |
| Spindle Taper | BT40 |
| Spindle Diameter | Φ70 mm |
| Spindle Speed | 10000rpm(Belt) |
| 3 axes Slide Way | Linear Way |
| 3 axes Cutting Feedrate | 10 /10 /10 m/min |
| 3 axes Rapid Feedrate | 36 /36 /36 m/min |
| Tool Magazine type | Armless type20 T |
| Tool Selection | Bi-direction shortest path |
| Max. Tool Diameter X Length | Φ100 X 250 mm |
| Max. Tool Weight | 7KG |
| Tool Shank | BT-40 |
| Spindle Motor(cont./30 min.) | 7.5/11KW |
| X/Y/Z axis Servomotor | 2.2/2.2/2.0 Kw |
| X/Y/Z axis Ball Screw | Φ36 X Pitch12 |
| Coolant Pump | 660W |
| External Dimension(L X W X H)(Approx) | 2180 X 2957 X 2632 mm |
| Net Weight/ Gross weight (Approx) | 4500kg/5000kg |
| Splash Guard | Full Splash Guard |
| Shipment Require | 40”HQ(4 sets) |
| Coolant Tank Capacity | 260L |