MF Series
Features
MF series bridge type machines, with typical VW products features of rigid structure and high precision, are designed with box ways with hand scrapping, slant beam with three ways, direct-driven Y-Z transmission, to get the heavy cutting and precision cutting with high acceleration/deceleration control. It’s the best choice for medium-to-large parts and mold machining.
Z-axis is at the symmetrical position of the spindle motor, offering accuracy and precision with micro smooth movement. Using Japan-made JIS0 gears for the gear head to get the advantages of high rigidity, high precision, and low noise.
3 axes independent ball-screw cooling device.
Solid casting structure, providing good mechanical static and dynamic accuracy.
65-degree slant beam device, with 3-sliding ways, provides strong support to the headstock. It offers the best performance for heavy cutting compared to others with the same column distance.
The direct-driven device on Y-Z axis transmission, with big servo motors, ensures the best accuracy and acceleration.
X-axis power transmission with gear reducer device offers servo motor high precision control and enhances the 2-4 times of driving torque. (MF/MN/MH)
An independent cooling device for 3-axes ball crews well restrains the axial heat extension. (MB/MF)
Separated oil coolers for spindle and 3-axes ball screws, with temperature setting -2 °C lower than room temperature, well control the heat deformation when machining. (MB/MF)
Specifications
| Model | Unit | MF-3000 | MF-4000 | MF-5000 | MF-3026 | MF-4026 | MF-5026 |
| X axis travel | mm | 3,200 | 4,200 | 5,200 | 3,200 | 4,200 | 5,200 |
| Y axis travel | mm | 2,300 | 2,600 | ||||
| Z axis travel | mm | 920/1,020(Opt.) | 920/1,020(Opt.) | ||||
| Table dimension | mm | 3,200×2,050 | 4,200×2,050 | 5,200×2,050 | 3,200×2,050 | 4,200×2,050 | 5,200×2,050 |
| Max. table load | kg | 11,000 | 13,000 | 15,000 | 11,000 | 13,000 | 15,000 |
| Spindle motor power (cont./ 30 min rated) |
kW | 18.5/22(22/26Opt.) (30/37Opt.) | 18.5/22(22/26Opt.) (30/37Opt.) | ||||
| Spindle speed | rpm | 4,000/6,000(Opt.) | 4,000/6,000(Opt.) | ||||
| Cutting federate | mm/min | 1-7,000 | 1-7,000 | ||||
| Rapid traverse (X/Y/Z) | m/min | X/Y/Z:12 | X:10 Y/Z:12 | X/Y/Z:12 | X:10 Y/Z:12 | ||
| ATC capacity | pcs | 40/60(Opt.) | 40/60(Opt.) | ||||
※Please contact sales for more details.
Accessories
Standard Accessory & Function
- Fanuc 0iMF PLUS Controller
- 4,000 rpm two-step gear spindle
- Spindle oil cooler
- Twin hydraulic cylinders with pressured air assistance balancing system
- X-axis ball screw supporter ( X > 4m above)
- Centralized auto lubrication system
- Independent lubrication oil collector
- Ball screw cooling system
- Air blast through spindle
- Wash gun and pneumatic interface
- Cutting fluid cooling system
- Enclosed sheet metal guard without roof
- Swiveling arm type operation panel
- Screw type chip conveyor on table side
- Caterpillar type chip conveyor / Water tank
- Heat exchanger for electrical cabinet
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- Footswitch for tool clamping
- RJ45 interface
- XYZ-axis absolute pulse coder feedback
- XYZ-axis travel hard limits protection
- Spindle cutting load software protection
- Remote monitoring software-Standard
- Auto power off
- Vision Wide FX graphical user interface
- Foundation pads and bolts kits
- Adjustment tool and tool kits
- Technical manuals (operation, maintenance manual and circuit diagram)
Optional Accessory & Function
- 6,000 rpm 2-step gear spindle
- Z-axis travel 1,020mm
- 200/300/400/500 mm higher column
- Interface preparation for coolant through spindle system
- Coolant through spindle system 20/70 bar
- Coolant through tool holder interface
- Coolant through tool holder 5 bar /20 bar cutting fluid interface
- Oil skimmer
- Oil mist cooling device
- Spindle ring cutting coolant device ( for no head attachment)
- 40/60 tools magazine with arm type ATC
- Enclosed splash guard with roof
- Chip auger on table side
- Chip cart
- Air conditioner for electrical cabinet
- XYZ-axis linear scale feedback
- 3-axis independent manual pulse generator
- Sub table
- Rotary table
- Interface reserved for fourth axis
- Z-axis retract function at power failure
- Anti-collision and machining simulation software
- Remote monitoring software-Professional (Not available for Siemens controller)
- Automatic tool length measurement
- Auto workpiece coordinate measurement
- Transformer
- Auto warm up