MS Series
features
MS series portal mill machines, with typical VW product features of rigid structure and high precision, are designed with a direct-driven X-Y transmission device and torque enlarger unit on X-axis, increasing the X-Y moving accuracy and offering the combination control of speed and precision.
- Twin Hydraulic cylinders plus pressured nitrogen accumulator balancing design provide smooth & accurate feeding performance. Z-axis can reach 0.5G acceleration and keep a holding position at power failure.
- Heavy duty roller ways on the X-Y axis contain the advantages of low friction and high stiffness.
- High stiffness light-weight table design, ensures high acceleration/deceleration when loading.
- Y-axis upper roller way is positioned on the top of the beam at max. span design offers strong support.
- The torque enlarger unit on the X-axis increases the transmission torque and ensures transmission accuracy.
specifications
| Model | Unit | MS-2116 | MS-2616 | MS-3116 | MS-4116 | MS-2120 | MS-2620 | MS-3120 | MS-4120 | ||
| X axis travel | mm | 2,100 | 2,600 | 3,100 | 4,100 | 2,100 | 2,600 | 3,100 | 4,100 | ||
| Y axis travel | mm | 1,600 | 2,000 | ||||||||
| Z axis travel | Box way | mm | 800 / 1,020 (Opt.) | 800 /1,020 (Opt.) | |||||||
| Linear way | mm | 800 / 1,000 (Opt.) | 800 /1,000 (Opt.) | ||||||||
| Table dimension | mm | 2,000×1,500 | 2,500×1,500 | 3,000×1,500 | 4,000×1,500 | 2,000×1,800 | 2,500×1,800 | 3,000×1,800 | 4,000×1,800 | ||
| Max. table load | kg | 8,000 | 9,000 | 10,000 | 12,000 | 8,000 | 9,000 | 10,000 | 12,000 | ||
| Spindle motor power(cont./30 min. rated) | kW | 18.5/22 (22/26Opt.) | 18.5/22 (22/26Opt.) | ||||||||
| Spindle speed | Box way | 2-step gear | rpm | 6,000/4,000(Opt.) | 6,000/4,000(Opt.) | ||||||
| Linear way | Direct-driven | rpm | 10,000(Opt.)/ 12,000(Opt.) | 10,000(Opt.)/ 12,000(Opt.) | |||||||
| Built-in | rpm | 10,000(Opt.) | 10,000(Opt.) | ||||||||
| Cutting federate | mm/min | 1-10,000 | 1-10,000 | ||||||||
| Rapid traverse(X/Y/Z) | m/min | XY：24 Z：15 | X/Y/Z：18/24/15 | XY：24 / Z：15 | X/Y/Z：18/24/15 | ||||||
| ATC capacity | Vertical type tool change | pcs | 32/40(Opt.) | 32/40(Opt.) | |||||||
| Floor-standing type vertical tool change | pcs | – | – | ||||||||
| Floor-standing type vertical-horizontal tool change | pcs | – | – | ||||||||
| Model | Unit | MS-2123 | MS-2623 | MS-3123 | MS-4123 | MS-2127 | MS-2627 | MS-3127 | MS-4127 | ||
| X axis travel | mm | 2,100 | 2,600 | 3,100 | 4,100 | 2,100 | 2,600 | 3,100 | 4,100 | ||
| Y axis travel | mm | 2,300 | 2,700 | ||||||||
| Z axis travel | Box way | mm | 800/1,020(Opt.) | 800/1,020(Opt.) | |||||||
| Linear way | mm | – | – | ||||||||
| Table dimension | mm | 2,000×1,500 | 2,500×1,500 | 3,000×1,500 | 4,000×1,500 | 2,000×1,800 | 2,500×1,800 | 3,000×1,800 | 4,000×1,800 | ||
| Max. table load | kg | 8,000 | 9,000 | 10,000 | 12,000 | 8,000 | 9,000 | 10,000 | 12,000 | ||
| Spindle motor power(cont./30 min. rated) | kW | 18.5/22 (22/26Opt.) | 18.5/22 (22/26Opt.) | ||||||||
| Spindle speed | Box way | 2-step gear | rpm | 6,000/4,000(Opt.) | 6,000/4,000(Opt.) | ||||||
| Linear way | Direct-driven | rpm | – | – | |||||||
| Built-in | rpm | – | – | ||||||||
| Cutting federate | mm/min | 1-10,000 | 1-10,000 | ||||||||
| Rapid traverse(X/Y/Z) | m/min | X/Y/Z : 24/20/15 | X/Y/Z：18/20/15 | X/Y/Z : 24/20/15 | X/Y/Z：18/20/15 | ||||||
| ATC capacity | Vertical type tool change | pcs | – | – | |||||||
| Floor-standing type vertical tool change | pcs | 32/40(Opt.) | 32/40(Opt.) | ||||||||
| Floor-standing type vertical-horizontal tool change | pcs | 32(Opt.)/40(Opt.)/60(Opt.) | 32(Opt.)/40(Opt.)/60(Opt.) | ||||||||
※Please contact sales for more details.
accessories
Standard Accessory & Function
- FANUC 0iMF PLUS controller
- 6,000rpm 2-step gear type spindle (Z axis box way)
- Spindle cooling system
- Twin hydraulic cylinders with pressured air assistance balancing system
- Centralized auto lubrication system
- Independent lubrication oil collector
- Air blast through spindle
- Wash gun and pneumatic interface
- Cutting fluid cooling system
- Sheet metal guard (without roof)
- Swiveling arm type operation panel
- Screw type chip conveyor on table side
- Caterpillar type chip conveyor / Water tank
- Heat exchanger for electcrical cabinet
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- Footswitch for tool clamping
- RJ 45 interface
- XYZ axis absolute pulse coder feedback
- XYZ axis travel hard limits protection
- Spindle cutting load software protection
- Remote monitoring software-standard
- Auto power off function
- Vision Wide FX graphical user interface
- Foundation pads and bolts kits
- Adjustment tool and tool kits
- Technical manuals
- (operation, maintenance manual and circuit diagram)
Optional Accessory & Function
- 4,000rpm 2-step gear type spindle (Z axis box way)
- 8,000/ 10,000rpm belt-driven spindle
- 10,000(BT-50)/ 12,000(BT-40)rpm direct-driven spindle
- Z axis travel 1,020mm(box way spindle head, for AC head attachment)
- Z axis travel 1,000mm(linear way spindle head)
- 200/ 300/ 400/ 500mm higher column(MS-xx12 series only for 200mm higher column)
- Spindle ring cutting coolant device (for no head attachment)
- Coolant through spindle system 20/70 bar (Vertical spindle)
- Coolant through tool holder interface
- Coolant through tool holder 5/20 bar cutting fluid interface
- Oil skimmer
- Oil mist cooling device
- 32/40/60 tools magazine with arm type ATC
- Enclosed sheet metal guard with roof
- Helical bladed screw conveyor on table sides
- Chip cart
- Air conditioning for electrical cabinet
- XYZ axis linear scale feedback
- 3 axis independent manual pulse generator
- Sub working table
- Rotary table
- Interface reserved for fourth axis
- Spindle cutting load hardware protection
- Z axis retract function at power failure
- Anti-collision and process simulation software
- Remote monitoring software-professional
- Auto tool length measurement
- Auto workpiece coordinate measurement
- TranMSormer
- Auto warm up function
- Spindle and structure temperature thermal compensation system