SE Series
features
SE series, a 3-axis portal type CNC High-Speed milling machine center released in 2017, and it was designed particularly for mold processing, aluminum alloy machining, and mass removal machining.
SE high-speed machining center had a 50% improvement in productivity to the excellent mechanism and structural performance.
- Spindle speed reaches 24,000 rpm
- 20 m/min of feed rate
- Precise contour accuracy
- Delicate surface roughness
- Positioning accuracy P 0.007mm
- Repeatability Ps 0.003 mm
- Aluminum alloy chips removal rate 5,000 cc/ min
If you are looking for high efficient, high accuracy and durable machining centers, you can trust Vision Wide Tech. Any suggestion, question or commentary regarding CNC machining, please don’t hesitate to submit them to our Customer Service Center.
specifications
| Model | Unit | SE-1612 | SE-2112 | SE-2612 | SE-1618 | SE-2118 | SE-2618 | SE-3118 | |
| X axis travel | mm | 1,600 | 2,100 | 2,600 | 1,600 | 2,100 | 2,600 | 3,100 | |
| Y axis travel | mm | 1,200 | 1,800 | ||||||
| Z axis travel | mm | 800/1,000(Opt.) | 800/1,000 (Opt.) | ||||||
| Table dimension | mm | 1,800×1,100 | 2,000×1,000 | 2,800×1,100 | 1,800×1,600 | 2,300×1,600 | 2,800×1,600 | 3,300×1,600 | |
| Max. table load | kg | 8,000 | 10,000 | 12,000 | 8,000 | 10,000 | 12,000 | 14,000 | |
| Spindle motor power (cont./30 min rated) | kW | 15/ 18.5 | 15/ 18.5 | ||||||
| Spindle speed | rpm | 15,000 | 15,000 | ||||||
| Cutting federate | mm/min | 1-24,000 | 1-24,000 | ||||||
| Rapid traverse(X/Y/Z) | m/min | 24/30 (Opt.) | 24/30 (Opt.) | ||||||
| ATC capacity | Vertical type tool change | pcs | 24 (20/32/40 Opt.) | 24 (20/32/40 Opt.) | |||||
※Please contact sales for more details.
accessories
- Standard Accessory & Function
- Fanuc 0iMF PLUS controller
- Direct driven spindle 15,000 rpm (BBT-40)
- Z travel 800 mm
- Spindle cooling system
- 24 Tools magazine with arm type ATC
- Centralized auto lubrication system
- Independent lubrication oil collector for 3 axes
- Air blast through spindle
- Wash gun and pneumatic interface
- Cutting fluid cooling system
- Enclosed sheet metal guard with roof
- Chip clean flushing device on table side grooves
- Caterpillar type chip conveyor / Water tank
- Heat exchanger for electrical cabinet
- Swiveling arm type operation panel
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- RJ45 interface
- Footswitch for tool clamping
- XYZ axis linear scale feedback
- Auto power off function
- Spindle cutting load software protection
- XYZ-axis travel hard limits protection
- Foundation pads and bolts kits
- Adjustment tool and tool kits
- Z-axis retract function at power failure
- Thermal compensation system of spindle
- Technical manuals (operation, maintenance manual and circuit diagram)
Optional Accessory & Function
- FANUC 31iB Controller ; HEIDENHAIN TNC 620/640 Controller
- Built-in spindle20,000/ 24000 rpm(HSK-A63)；
- 10,000/12,000 rpm(50#, HSK-A100)
- Direct driven spindle 10,000/12,000 rpm (50#, HSK-A100)
- Rapid traverse (X/Y/Z) 30 m/min
- Z axis travel 1,000 mm
- Column higher 200 mm
- Spindle ring cutting coolant device (Built-in spindle excluded)
- Coolant through spindle system 20/70 bar(Vertical spindle)
- Reserved interface for coolant through spindle system
- Oil skimmer
- Oil mist cooling device
- Oil mist recycle device
- 20 tools magazine carousel type; 32/40 tools magazine arm type ATC
- Enclosed sheet metal guard without roof
- Chip clean flushing device on table side grooves
- Helical bladed screw conveyor on table sides
- Chip cart
- Air conditioner for electrical cabinet
- Transformer
- Interface reserved for fourth axis
- Auto tool length measurement
- Auto workpiece coordinate measurement
- Spindle load hardware protection
- XYZ axis HEIDENHAIN linear scale
- CE Regulation