GS Series
Features
GS series, the Gantry CNC milling machine center of Vision Wide, featured with box structural design that is suitable for limited working space, and its one-piece design of work table and columns provides stable, speedy feeding performance that meets precision mold and aluminum cutting requirements.
GS CNC gantry type machining center performs efficient productivity with powerful spindle and best structural configuration that gives you smooth and fine surface within the available time. Its maximal rapid traverse of 3 axes reaches 24 m/ min, and the maximal cutting feed rate is 24,000 mm/ min.
- Combination of columns, bed, and table in one piece casting, the Pyramid type weight distribution by the spindle, ran, cross beam, and bed arrangement.
- X-axis with dual direct-driven servo motor, plus dual linear scales can ensure positioning accuracy at high-speed motion.
- Z-axis is direct-driven, by servo motor prevents the error from indirect-driven between mechanisms, decreases power consumption, and improves Z-axis motion performance efficiently.
- Direct-driven spindle 10,000/15,000rpm, low noise, backlash, vibration, and power consumption can ensure high work-piece surface accuracy after rapid cutting.
- Low table height, closer operating zone, and wider door width are convenient designs for users.
- Chain type chip conveyor (standard) is able to remove iron chips efficiently.
Specifications
| Model | Unit | GS-1220 | GS-1620 | GS-2020 | GS-2520 | GS-3020 |
| X axis travel | mm | 1,200 | 1,600 | 2,000 | 2,500 | 3,000 |
| Y axis travel | mm | 2,000 | ||||
| Z axis travel | mm | 800 / 1,000 (Opt.) | ||||
| Table dimension | mm | 1,200 x 2,000 | 1,600 x 2,000 | 2,000 x 2,000 | 2,500 x 2,000 | 3,000 x 2,000 |
| Max. table load | kg/m2 | 3,000 | ||||
| Spindle motor power (cont./ 30 min rated) |
kW | L：15 / 18.5 | ||||
| Spindle speed | rpm | 15,000 | ||||
| Cutting federate | mm/min | 1-24,000 | ||||
| Rapid traverse (X/Y/Z) | m/min | XYZ：24/30(Opt.) | ||||
| ATC capacity | pcs | 20T / 32T (Opt.) | ||||
※Please contact sales for more details.
Accessories
Standard Accessory & Function
- Fanuc 0iMF PLUS controller
- Direct-driven spindle 15,000rpm
- Z travel 800 mm
- Spindle cooling system
- 20T tool magazine with arm type ATC
- Centralized auto lubrication system
- Independent lubrication oil collector for 3 axes
- Air blast through spindle
- Wash gun and pneumatic interface
- Cutting fluid cooling system
- Enclosed sheet metal guard without roof
- Chip clean flushing device on table side grooves
- Caterpillar type chip conveyor / Water tank
- Heat exchanger
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- RJ45 interface
- Footswitch for tool clamping
- XYZ axis linear scale feedback
- Auto power off function
- Spindle loading protection by software
- XYZ axis travel hard limits protection
- Foundation pads and bolts kits
- Adjustment tool and tool kits
- Z-axis retract function at power failure
- Thermal compensation System
- Technical manuals (operation, maintenance manual and circuit diagram)
Optional Accessory & Function
- Fanuc 31iB Controller;
- HEIDENHAIN TNC 620/640 Controller
- Built-in spindle: 20,000/24,000/28,000 rpm (HSK-A63); 10,000/12,000 (HSK-A100)
- Direct driven spindle: 10,000/12,000(50#)
- Rapid traverse (X/Y/Z) 30 m/min
- Z travel 1,000 mm
- 32 tools magazine with arm type ATC
- Coolant through spindle system 20 / 70 bars
- Spindle ring cutting coolant device (for no head attachment)
- Oil skimmer
- Oil mist cooling device
- Enclosed sheet metal guard with roof
- Chip clean flushing device on table side grooves
- Helical bladed screw conveyor on table sides
- Foot pad above chip groove
- Caterpillar type chip conveyor / Water tank
- Chip cart
- Sub table
- XYZ-axis independent manual pulse generator
- Remote monitoring software-Standard (Not available for Siemens controller)
- Auto tool length measurement system
- Auto workpiece coordinate measurement
- Transformer