Machines

HF Series-alex power

HF Series

features

HF series, the 3-axis bridge type CNC milling machining center, is one of the proudest products of Vision Wide which fulfills automatic 5-face machining with super rigidity structure and high positioning accuracy, and its X travel ranges from 4,100mm to 10,100mm, and Y travel ranges from 3,500mm to 4,700mm. HF satisfies demands in mold surface cutting, angles cutting, 3D mold cutting, and precise contour finishing.

We developed tool center point compensation, auto multi-angle head attachment, and auto tool change system to complete auto 5-face machining.

  • High rigidity box base, best span worktable guideways, and wider load dimension ensured the best level of dynamic accuracy.
  • Cross-section square beam enabled the center of the head close to the beam center to ensure the heavy cutting ability.
  • Fully auto 5-face machining capacity
  • Auto head change: 90º head/extension head / universal head
  • Vertical and horizontal auto tool change for 90º head
  • AC 3-axis mechanical coordinates system

 specifications

Model Unit HF-4235 /HF-4242 HF-5235 /HF-5242 HF-6235 /HF-6242 HF-8235 /HF-8242 HF-10235 /HF-10242
X axis travel mm 4,100 5,100 6,100 8,100 10,100
Y axis travel mm 3,500/ 4,200
Z axis travel Box way / single ballscrew mm 920 ; 1,020(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews mm 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.)
Table dimension mm 4,000×3,000 5,000×3,000 6,000×3,000 8,000×3,000 10,000×3,000
Max. table load kg 20,000 24,000 28,000 32,000 36,000
Spindle motor power(cont./30 min. rated) kW 22/26(30/37Opt.)
Spindle speed Box way /
Single ballscrew
2-step gear rpm 4,000 ; 6,000(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews 2-step gear rpm 4,000 ; 6,000(Opt.)
Direct-driven rpm 10,000(Opt.)
Cutting federate mm/min 1-7,000
Rapid traverse X axis m/min 10 8
Y axis m/min 10/10
Zaxis Box way / Single ballscrew
Linear way/ Dual ballscrews
m/min 15
Enclosed Box Ram/Dual ballscrews m/min 12
ATC capacity Vertical type tool change pcs 32 / 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical tool change pcs 32 (Opt.) / 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical-horizontal tool change pcs 32 (Opt.) / 40 (Opt.) / 60 (Opt.)

 

Model Unit HF-4240 /HF-4247 HF-5240 /HF-5247 HF-6240 /HF-6247 HF-8240 /HF-8247 HF-10240 /HF-10247
X axis travel mm 4,100 5,100 6,100 8,100 10,100
Y axis travel mm 4,000/ 4,700
Z axis travel Box way / single ballscrew mm 920 ; 1,020(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews mm 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.)
Table dimension mm 4,000×3,500 5,000×3,500 6,000×3,500 8,000×3,500 10,000×3,500
Max. table load kg 20,000 24,000 28,000 32,000 36,000
Spindle motor power(cont./30 min. rated) kW 22/26(30/37Opt.)
Spindle speed Box way /
Single ballscrew
2-step gear rpm 4,000 ; 6,000(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews 2-step gear rpm 4,000 ; 6,000(Opt.)
Direct-driven rpm 10,000(Opt.)
Cutting federate mm/min 1-7,000
Rapid traverse X axis m/min 10 8
Y axis m/min 10/10
Zaxis Box way / Single ballscrew
Linear way/ Dual ballscrews
m/min 15
Enclosed Box Ram/Dual ballscrews m/min 12
ATC capacity Vertical type tool change pcs 32 / 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical tool change pcs 32 (Opt.) / 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical-horizontal tool change pcs 32 (Opt.) / 40 (Opt.) / 60 (Opt.)

※Please contact sales for more details.

specifications

Standard Accessory & Function

  • FANUC 0iMF PLUS controller
  • Box way 4,000rpm 2-step gear type spindle
  • Z axis travel 920mm (Box way)
  • Spindle cooling system
  • Twin hydraulic cylinders with pressured Nitrogen auxiliary counterweight system
  • X, Y axis ballscrew support device (X axis ≧4m,Y axis ≧3m)
  • Centralized auto lubrication system
  • Independent lubrication oil collector
  • Air blast through spindle
  • Wash gun and pneumatic interface
  • Cutting fluid cooling system
  • Vertical type tool magazine 32 tools
  • Enclosed sheet metal guard without roof (NF series X axis ≦6m)
  • Four piece sheet metal guard (NF series X axis ≧ 8m) (all HF series)
  • Screw type chip conveyor on table sides
  • Caterpillar type chip conveyor / Water tank
  • Heat exchanger for electrical cabinet
  • Swiveling arm type operation panel
  • Working lamp
  • Operation cycle finish and alarm light
  • Movable manual pulse generator
  • Footswitch for tool clamping
  • RJ45 interface
  • XYZ-axis absolute pulse coder feedback
  • XYZ-axis travel hard limits protection
  • Spindle cutting load software protection
  • Auto power off function
  • Vision Wide FX graphical user interface
  • Foundation pads and bolts kits
  • Adjustment tool and tool kits
  • Technical manuals (operation, maintenance manual and circuit diagram)

Optional Accessory & Function

  • FANUC 31iB/ SIEMENS 828D / HEIDENHAIN TNC640/ SIEMENS ONE / MITSUBISHI M80 TypeA/
  • MITSUBISHI M830 controller
  • Box way :
  • 6,000rpm 2-step gear type spindle
  • Linear way/Enclosed Box Ram :
  • 4,000/6,000rpm 2-step gear type spindle
  • 10,000/12,000rpm direct driven type spindle
  • 8,000/12,000rpm Built-in type spindle
  • Z axis travel 1,020mm (Box way)
  • Z axis travel 1000/1200/1400mm
  • (Linear way/Enclosed Box Ram,for gear/ direct-driven / built-in type spindle)
  • Column heighten 200/400/600/800mm
  • Spindle ring cutting coolant device(for no head attachment)
  • Coolant through spindle system 20/70 bar
  • Coolant through tool holder 5/18 bar cutting fluid system
  • Oil skimmer
  • Oil mist cooling device
  • Oil mist recycle device
  • Vertical type tool magazine 40/60 tools
  • Floor-standing vertical type tool magazine 40/60 tools
  • Floor-standing vertical-horizontal type tool magazine 40/60/90 tools
  • Four piece sheet metal guard(NF series X axis ≦ 6m)
  • Enclosed sheet metal guard with roof(NF series X axis ≦ 6m)(not for NF-xx32/39 and HF series)
  • Enclosed sheet metal guard without roof(NF series X axis ≧ 8m)(all HF series)
  • Helical bladed screw conveyor on table sides
  • Chip cart
  • Air conditioning for electrical cabinet
  • Wireless remote control manual pulse generator
  • 3-axis independent manual pulse generator(Only for FANUC)
  • XYZ axis linear scale feedback
  • Sub working table
  • Rotary table
  • Interface reserved for fourth axis
  • The interface of coolant through spindle
  • Z-axis retract function at power failure
  • Auto measurement system
  • Auto warm up
  • Transformer
  • Spindle and structure temperature thermal compensation system
  • Switch for tool clamping
Get Quotation