HQ-500NCAD
Features
Figure-touched interface
- Figure-touched interface – simply touch the corresponding figures & words to proceed the operation.
- The panel displays the movement situation of the machine and bending angle.
The characters of Controller
- Operation Mode manual, semi-automatic, fully-automatic, program input and modification.
- Control-axis Bending axis C
- Max. Bends / per program : 16 Bends.
- Max. Memorized Programs : 200 sets.
- Action setting workload counter, mandrel on/ mandrel off option, Pressure die booster function, slow mandrel-backward function / special equipment.
Architecture
- Pressure die booster is controlled by individual hydraulic cylinder that enhances the processing stabilization.
- The quick tooling change system is favor of production.
Modularized design
- Modularized design on circuit, easy maintenance and replacement.
- Auto detective and error movement indicating functions prevent machine from being damaged by wrong operation.
Multi-protection design
- Mobile pedal switch and side emergency stop switch keep users from dangers.
- Code protection function guards the program and process data.
- Overload protection of main motor, monitoring of mechanical, anti-unreasonable operation.
Specification
| Spec / Model | HQ-500NCAD | |
|---|---|---|
| Max. Tube O.D. & W.T. (O.D. x t) | Mild Steel (mm) | ø50.8 x 2.5t |
| Stainless Steel (mm) | ø45.0 x 1.8t | |
| Rectangle Pipe (mm) | □45.0 x 1.5t | |
| Max. Draw Bending Radius (mm) | 400 | |
| Max. Bending Angle (degree) | 210° | |
| Per 90° Speed/Sec | 7 | |
| Bending Accuracy | ±0.1 | |
| Max. Effective Distance of Mandrel(mm) | 2000 | |
| Horse Power | 10HP | |
| Machine Size (L x W x H）(m) | 3.6 x 1 x 1.4 mm | |
| Machine Weight (kgs) | 2000 | |
Remarks:1.Due to the continuous improvement on design, the specifications above are subject to change without notice.
2.Max. Effective Distance of Mandrel(mm) can be extended as request.
3.H-series without “Q” means “No mandrel Seat device is equipped”.