☰

Machines

MN Series-alex power

MN Series

 

 

 

 

 

 

 

 

features

  •  MN series machines, with typical VW product features of rigid structure and high precision, are designed with a 5-face function of multi-angle cutting and X-Y roller ways structure. It speeds up 3 axes rapid traverse and increases the machine’s efficiency of utilization.
  • A solid beam with a big cross-section and roller ways design strengthens the stiffness of the Y-travel.
  • A wide base with 3 roller sliding ways improves the load capacity and dynamic accuracy.
  • Box structure of headstock with 6 guiding roller blocks and 1-1.4 meter Z-travel keeps stiffness and minimizes the interference between spindle and workpiece, carrying the complete function of 5-face cutting. High efficient power transmission is made by a well-arranged spindle motor position and short shaft device.

 Specifications

Model Unit MN-3223 /MN-3230 MN-4223 /MN-4230 MN-5223 /MN-5230 MN-6223 /MN-6230 MN-8223 / MN-8230 MN-10223 / MN-10230
X axis travel mm 3,100 4,100 5,100 6,100 8,100 10,100
Y axis travel mm 2,300/ 3,000
Z axis travel Box way / single ballscrew mm 920 ; 1,020(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews mm 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.)
Table dimension mm 3,000×2,050 4,000×2,050 5,000×2,050 6,000×2,050 8,000×2,050 10,000×2,050
Max. table load kg 13,000 16,000 20,000 22,000 24,000 26,000
Spindle motor power(cont./30 min. rated) kW 18.5/22(22/26Opt.)(30/37Opt.)
Spindle speed Box way / single ballscrew 2-step gear rpm 4,000 ; 6,000(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews 2-step gear rpm 4,000 ; 6,000(Opt.)
Direct-driven rpm 10,000(Opt.)
Cutting federate mm/min 1-10,000 1-7,000
Rapid traverse (X/Y/Z) X axis m/min 24 18 12.5 10 8
Y axis m/min 20 / 15
Zaxis Box way / single ballscrew
Linear way/ Dual ballscrews		 m/min 15
Enclosed Box Ram/Dual ballscrews m/min 12
ATC capacity Vertical type tool change pcs 40 / 60 (Opt.)
Floor-standing type vertical tool change pcs 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical-horizontal tool change pcs  40 (Opt.) / 60 (Opt.)

 

Model Unit MN-3226 /MN-3233 MN-4226 /MN-4233 MN-5226 /MN-5233 MN-6226 /MN-6233 MN-8226 /MN-8233 MN-10226 /MN-10233
X axis travel mm 3,100 4,100 5,100 6,100 8,100 10,100
Y axis travel mm 2,600/ 3,300
Z axis travel Box way / single ballscrew mm 920 ; 1,020(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews mm 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.)
Table dimension mm 3,000×2,450 4,000×2,450 5,000×2,450 6,000×2,450 8,000×2,450 10,000×2,450
Max. table load kg 13,000 16,000 20,000 22,000 24,000 26,000
Spindle motor power(cont./30 min. rated) kW 18.5/22(22/26Opt.)(30/37Opt.)
Spindle speed Box way / single ballscrew 2-step gear rpm 4,000 ; 6,000(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews 2-step gear rpm 4,000 ; 6,000(Opt.)
Direct-driven rpm 10,000(Opt.)
Cutting federate mm/min 1-10,000 1-7,000
Rapid traverse (X/Y/Z) X axis m/min 24 18 12.5 10 8
Y axis m/min 20 / 15
Zaxis Box way / single ballscrew
Linear way/ Dual ballscrews		 m/min 15
Enclosed Box Ram/Dual ballscrews m/min 12
ATC capacity Vertical type tool change pcs 40 / 60 (Opt.)
Floor-standing type vertical tool change pcs 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical-horizontal tool change pcs  40 (Opt.) / 60 (Opt.)

 

Model Unit MN-3232 /MN-3239 MN-4232 /MN-4239 MN-5232 /MN-5239 MN-6232 /MN-6239 MN-8232 /MN-8239 MN-10232 /MN-10239
X axis travel mm 3,100 4,100 5,100 6,100 8,100 10,100
Y axis travel mm 3200/ 3,900
Z axis travel Box way / single ballscrew mm 920 ; 1,020(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews mm 1,000(Opt.) ; 1,200(Opt.) ; 1,400(Opt.)
Table dimension mm 3,000×2,450 4,000×2,450 5,000×2,450 6,000×2,450 8,000×2,450 10,000×2,450
Max. table load kg 13,000 16,000 20,000 22,000 24,000 26,000
Spindle motor power(cont./30 min. rated) kW 18.5/22(22/26Opt.)(30/37Opt.)
Spindle speed Box way / single ballscrew 2-step gear rpm 4,000 ; 6,000(Opt.)
Linear way, Enclosed Box Ram/Dual ballscrews 2-step gear rpm 4,000 ; 6,000(Opt.)
Direct-driven rpm 10,000(Opt.)
Cutting federate mm/min 1-10,000 1-7,000
Rapid traverse (X/Y/Z) X axis m/min 24 18 12.5 10 8
Y axis m/min 15 / 15
Zaxis Box way / single ballscrew
Linear way/ Dual ballscrews		 m/min 15
Enclosed Box Ram/Dual ballscrews m/min 12
ATC capacity Vertical type tool change pcs 40 / 60 (Opt.)
Floor-standing type vertical tool change pcs 40 (Opt.) / 60 (Opt.)
Floor-standing type vertical-horizontal tool change pcs  40 (Opt.) / 60 (Opt.)

※Please contact sales for more details.

accessories

Standard Accessory & Function

  • FANUC 0iMF PLUS controller
  • Box way 4,000rpm 2-step gear type spindle
  • Z axis travel 920mm (Box way)
  • Spindle cooling system
  • Twin hydraulic cylinders with pressured Nitrogen auxiliary counterweight system
  • X, Y axis ballscrew support device (X axis ≧4m，Y axis ≧3m)
  • Centralized auto lubrication system
  • Independent lubrication oil collector
  • Air blast through spindle
  • Wash gun and pneumatic interface
  • Cutting fluid cooling system
  • Enclosed sheet metal guard without roof (MN series X axis ≦6m)
  • Four piece sheet metal guard (MN series X axis ≧ 8m) (all MHN series)
  • Screw type chip conveyor on table sides
  • Caterpillar type chip conveyor / Water tank
  • Heat exchanger for electrical cabinet
  • Swiveling arm type operation panel
  • Working lamp
  • Operation cycle finish and alarm light
  • Movable manual pulse generator
  • Footswitch for tool clamping
  • RJ45 interface
  • XYZ-axis absolute pulse coder feedback
  • XYZ-axis travel hard limits protection
  • Spindle cutting load software protection
  • Auto power off function
  • Vision Wide FX graphical user interface
  • Foundation pads and bolts kits
  • Adjustment tool and tool kits
  • Technical manuals (operation, maintenance manual and circuit diagram)

Optional Accessory & Function

  • FANUC 31iB/ SIEMENS 828D / HEIDENHAIN TNC640/ SIEMENS ONE / MITSUBISHI M80 TypeA/
  • MITSUBISHI M830 controller
  • Box way :
  • 6,000rpm 2-step gear type spindle
  • Linear way/Enclosed Box Ram :
  • 4,000/6,000rpm 2-step gear type spindle
  • 10,000/12,000rpm direct driven type spindle
  • 8,000/12,000rpm Built-in type spindle
  • Z axis travel 1,020mm (Box way)
  • Z axis travel 1000/1200/1400mm
  • (Linear way/Enclosed Box Ram，for gear/ direct-driven / built-in type spindle)
  • Column heighten 200/400/600/800mm
  • Spindle ring cutting coolant device (for no head attachment)
  • Coolant through spindle system 20/70 bar
  • Coolant through tool holder 5/18 bar cutting fluid system
  • Oil skimmer
  • Oil mist cooling device
  • Oil mist recycle device
  • Vertical type tool magazine 32/40/60 tools
  • Floor-standing vertical type tool magazine 40/60 tools
  • Floor-standing vertical-horizontal type tool magazine 40/60/90 tools
  • Four piece sheet metal guard (MN series X axis≦6m)
  • Enclosed sheet metal guard with roof (MN series X axis≦6m) (not for MN-xx32/39 and MHN series)
  • Enclosed sheet metal guard without roof (MN series X axis ≧ 8m) (all MHN series)
  • Helical bladed screw conveyor on table sides
  • Chip cart
  • Air conditioning for electrical cabinet
  • Wireless remote control manual pulse generator
  • 3-axis independent manual pulse generator
  • XYZ axis linear scale feedback
  • Sub working table
  • Rotary table
  • Interface reserved for fourth axis
  • The interface of coolant through spindle
  • Z-axis retract function at power failure
  • Auto measurement system
  • Auto warm up
  • Transformer
  • Spindle and structure temperature thermal compensation system
  • Switch for tool clamping
Get Quotation