☰

Machines

MS Series-alex power

MS Series

features

MS series portal mill machines, with typical VW product features of rigid structure and high precision, are designed with a direct-driven X-Y transmission device and torque enlarger unit on X-axis, increasing the X-Y moving accuracy and offering the combination control of speed and precision.

  • Twin Hydraulic cylinders plus pressured nitrogen accumulator balancing design provide smooth & accurate feeding performance. Z-axis can reach 0.5G acceleration and keep a holding position at power failure.
  • Heavy duty roller ways on the X-Y axis contain the advantages of low friction and high stiffness.
  • High stiffness light-weight table design, ensures high acceleration/deceleration when loading.
  • Y-axis upper roller way is positioned on the top of the beam at max. span design offers strong support.
  • The torque enlarger unit on the X-axis increases the transmission torque and ensures transmission accuracy.

specifications

Model Unit MS-2116 MS-2616 MS-3116 MS-4116 MS-2120 MS-2620 MS-3120 MS-4120
X axis travel mm 2,100 2,600 3,100 4,100 2,100 2,600 3,100 4,100
Y axis travel mm 1,600 2,000
Z axis travel Box way mm 800 / 1,020   (Opt.) 800 /1,020 (Opt.)
Linear way mm 800 / 1,000   (Opt.) 800 /1,000 (Opt.)
Table dimension mm 2,000×1,500 2,500×1,500 3,000×1,500 4,000×1,500 2,000×1,800 2,500×1,800 3,000×1,800 4,000×1,800
Max. table load kg 8,000 9,000 10,000 12,000 8,000 9,000 10,000 12,000
Spindle motor power(cont./30 min. rated) kW 18.5/22  (22/26Opt.) 18.5/22  (22/26Opt.)
Spindle speed Box way 2-step gear rpm 6,000/4,000(Opt.) 6,000/4,000(Opt.)
Linear way Direct-driven rpm 10,000(Opt.)/ 12,000(Opt.) 10,000(Opt.)/ 12,000(Opt.)
Built-in rpm 10,000(Opt.) 10,000(Opt.)
Cutting federate mm/min 1-10,000 1-10,000
Rapid traverse(X/Y/Z) m/min XY：24  Z：15 X/Y/Z：18/24/15 XY：24 / Z：15 X/Y/Z：18/24/15
ATC capacity Vertical type tool change pcs 32/40(Opt.) 32/40(Opt.)
Floor-standing type vertical tool change pcs – –
Floor-standing type vertical-horizontal tool change pcs – –

 

Model Unit MS-2123 MS-2623 MS-3123 MS-4123 MS-2127 MS-2627 MS-3127 MS-4127
X axis travel mm 2,100 2,600 3,100 4,100 2,100 2,600 3,100 4,100
Y axis travel mm 2,300 2,700
Z axis travel Box way mm 800/1,020(Opt.) 800/1,020(Opt.)
Linear way mm – –
Table dimension mm 2,000×1,500 2,500×1,500 3,000×1,500 4,000×1,500 2,000×1,800 2,500×1,800 3,000×1,800 4,000×1,800
Max. table load kg 8,000 9,000 10,000 12,000 8,000 9,000 10,000 12,000
Spindle motor power(cont./30 min. rated) kW 18.5/22  (22/26Opt.) 18.5/22  (22/26Opt.)
Spindle speed Box way 2-step gear rpm 6,000/4,000(Opt.) 6,000/4,000(Opt.)
Linear way Direct-driven rpm – –
Built-in rpm – –
Cutting federate mm/min 1-10,000 1-10,000
Rapid traverse(X/Y/Z) m/min X/Y/Z : 24/20/15 X/Y/Z：18/20/15 X/Y/Z : 24/20/15 X/Y/Z：18/20/15
ATC capacity Vertical type tool change pcs – –
Floor-standing type vertical tool change pcs 32/40(Opt.) 32/40(Opt.)
Floor-standing type vertical-horizontal tool change pcs 32(Opt.)/40(Opt.)/60(Opt.) 32(Opt.)/40(Opt.)/60(Opt.)

※Please contact sales for more details.

accessories

Standard Accessory & Function

  • FANUC 0iMF PLUS controller
  • 6,000rpm 2-step gear type spindle (Z axis box way)
  • Spindle cooling system
  • Twin hydraulic cylinders with pressured air assistance balancing system
  • Centralized auto lubrication system
  • Independent lubrication oil collector
  • Air blast through spindle
  • Wash gun and pneumatic interface
  • Cutting fluid cooling system
  • Sheet metal guard (without roof)
  • Swiveling arm type operation panel
  • Screw type chip conveyor on table side
  • Caterpillar type chip conveyor / Water tank
  • Heat exchanger for electcrical cabinet
  • Working lamp
  • Operation cycle finish and alarm light
  • Movable manual pulse generator
  • Footswitch for tool clamping
  • RJ 45 interface
  • XYZ axis absolute pulse coder feedback
  • XYZ axis travel hard limits protection
  • Spindle cutting load software protection
  • Remote monitoring software-standard
  • Auto power off function
  • Vision Wide FX graphical user interface
  • Foundation pads and bolts kits
  • Adjustment tool and tool kits
  • Technical manuals
  • (operation, maintenance manual and circuit diagram)

Optional Accessory & Function

  • 4,000rpm 2-step gear type spindle (Z axis box way)
  • 8,000/ 10,000rpm belt-driven spindle
  • 10,000(BT-50)/ 12,000(BT-40)rpm direct-driven spindle
  • Z axis travel 1,020mm(box way spindle head, for AC head attachment)
  • Z axis travel 1,000mm(linear way spindle head)
  • 200/ 300/ 400/ 500mm higher column(MS-xx12 series only for 200mm higher column)
  • Spindle ring cutting coolant device (for no head attachment)
  • Coolant through spindle system 20/70 bar (Vertical spindle)
  • Coolant through tool holder interface
  • Coolant through tool holder 5/20 bar cutting fluid interface
  • Oil skimmer
  • Oil mist cooling device
  • 32/40/60 tools magazine with arm type ATC
  • Enclosed sheet metal guard with roof
  • Helical bladed screw conveyor on table sides
  • Chip cart
  • Air conditioning for electrical cabinet
  • XYZ axis linear scale feedback
  • 3 axis independent manual pulse generator
  • Sub working table
  • Rotary table
  • Interface reserved for fourth axis
  • Spindle cutting load hardware protection
  • Z axis retract function at power failure
  • Anti-collision and process simulation software
  • Remote monitoring software-professional
  • Auto tool length measurement
  • Auto workpiece coordinate measurement
  • TranMSormer
  • Auto warm up function
  • Spindle and structure temperature thermal compensation system
Get Quotation