MSE Series
features
MSE MSEries, a 3-axis portal type CNC High-Speed milling machine center releaMSEd in 2017, and it was designed particularly for mold processing, aluminum alloy machining, and mass removal machining.
MSE high-speed machining center had a 50% improvement in productivity to the excellent mechanism and structural performance.
- Spindle speed reaches 24,000 rpm.
- 20 m/min of feed rate.
- PreciMSE contour accuracy.
- Delicate surface roughness.
- Positioning accuracy P 0.007mm.
- Repeatability Ps 0.003 mm.
- Aluminum alloy chips removal rate 5,000 cc/ min.
specifications
| Model | Unit | MSE-1612 | MSE-2112 | MSE-2612 | MSE-1618 | MSE-2118 | MSE-2618 | MSE-3118 | |
| X axis travel | mm | 1,600 | 2,100 | 2,600 | 1,600 | 2,100 | 2,600 | 3,100 | |
| Y axis travel | mm | 1,200 | 1,800 | ||||||
| Z axis travel | mm | 800/1,000(Opt.) | 800/1,000(Opt.) | ||||||
| Table dimension | mm | 1,800×1,100 | 2,000×1,000 | 2,800×1,100 | 1,800×1,600 | 2,300×1,600 | 2,800×1,600 | 3,300×1,600 | |
| Max. table load | kg | 8,000 | 10,000 | 12,000 | 8,000 | 10,000 | 12,000 | 14,000 | |
| Spindle motor power (cont./30 min rated) | kW | 15/ 18.5 | 15/ 18.5 | ||||||
| Spindle speed | rpm | 15,000 | 15,000 | ||||||
| Cutting federate | mm/min | 1-24,000 | 1-24,000 | ||||||
| Rapid traverse(X/Y/Z) | m/min | 24/30 (Opt.) | 24/30 (Opt.) | ||||||
| ATC capacity | Vertical type tool change | pcs | 24 (20/32/40 Opt.) | 24 (20/32/40 Opt.) | |||||
※Please contact sales for more details.
accessories
Standard Accessory & Function
- Fanuc 0iMF PLUS controller
- Direct driven spindle 15,000 rpm (BBT-40)
- Z travel 800 mm
- Spindle cooling system
- Centralized auto lubrication system
- Independent lubrication oil collector for 3 axes
- Air blast through spindle
- Wash gun and pneumatic interface
- Cutting fluid cooling system
- Enclosed sheet metal guard with roof
- Chip clean flushing device on table side grooves
- Caterpillar type chip conveyor / Water tank
- Heat exchanger for electrical cabinet
- Swiveling arm type operation panel
- Working lamp
- Operation cycle finish and alarm light
- Movable manual pulse generator
- RJ45 interface
- Footswitch for tool clamping
- XYZ axis linear scale feedback
- Auto power off function
- Spindle cutting load software protection
- XYZ-axis travel hard limits protection
- Foundation pads and bolts kits
- Adjustment tool and tool kits
- Z-axis retract function at power failure
- Thermal compensation system of spindle
- Technical manuals (operation, maintenance manual and circuit diagram)
Optional Accessory & Function
- FANUC 31iB Controller ; HEIDENHAIN TNC 620/640 Controller
- Built-in spindle20,000/ 24000 rpm(HSK-A63)；10,000/12,000 rpm(50#, HSK-A100)
- Direct driven spindle 10,000/12,000 rpm (50#, HSK-A100)
- Rapid traverse (X/Y/Z) 30 m/min
- Z axis travel 1,000 mm
- Column higher 200 mm
- Spindle ring cutting coolant device (Built-in spindle excluded)
- Coolant through spindle system 20/70 bar(Vertical spindle)
- Reserved interface for coolant through spindle system
- Oil skimmer
- Oil mist cooling device
- Oil mist recycle device
- 20 tools magazine carousel type; 24/32/40 tools magazine arm type ATC
- Enclosed sheet metal guard without roof
- Chip clean flushing device on table side grooves
- Helical bladed screw conveyor on table sides
- Chip cart
- Air conditioner for electrical cabinet
- Transformer
- Interface reserved for fourth axis
- Auto tool length measurement
- Auto workpiece coordinate measurement
- Spindle load hardware protection
- XYZ axis HEIDENHAIN linear scale
- CE Regulation